Sponsor Overviews
Expand All Overviews | Collapse All Overviews
| Event Sponsor |
|
|
 |
Company Overview |
| Voith sets standards in the markets energy, oil & gas, paper, raw materials and transport & automotive. With more than 40 000 employees and locations in over 50 countries of the world, Voith is one of the large family-owned companies in Europe.
Voith Hydro Ocean Current Technologies (VHOCT), Heidenheim, is a Center of Competence for the development of ocean current power stations (tidal and permanent currents).
The kinetic energy from ocean currents is transformed into electrical power using free-flowing, three-bladed horizontal axis turbines.
Because of their similar physical properties, sea current turbines are like wind power turbines. However, since water as their driving medium has a mass density 800 times higher than air, they are equipped with much shorter rotor blades.
In order to meet the special requirements regarding installation and maintenance, the tidal current turbine from Voith differs significantly from a wind turbine in terms of its interior. The system is particularly simple, sturdy and low-maintenance. A deliberate effort was made to avoid using any high-maintenance elements, such as blade angle adjustment, current tracking, gears, dynamic seals, electrical simulation and lubrication of the bearings, etc.
For applications in tidal currents, where the direction of flow is changed every six hours, rotor blades are used which operate from both sides. Thus, the turbine changes the direction of rotation at each tidal change.
In summer 2012 VHOCT has successfully completed the test of its 1:3 scale prototype in Jindo, Korea and is currently assembling a 1 MW commercial size demonstrator for installation at the European Marine Energy Center in Orkney, Scotland. |
|
|
|
 |
Company Overview |
| McLaughlin and Harvey are one of Northern Ireland’s largest Contractors and operate throughout GB and Ireland The company has expert in house disciplines including Civil & Marine Engineering and Building Construction.
McLaughlin and Harvey have been actively involved in the Marine Renewable Energy Sector for the last 8 years and are market leaders in the deployment of tidal energy devices, including foundation installation, cabling and operation and maintenance. Among others, McLaughlin and Harvey played a key role in the the development of Openhydro’s test facility at EMEC as well as the barge and installation techniques adopted by the company. McLaughlin and Harvey constructed the piled test platform at EMEC and installed gravity base foundations at EMEC and Bay of Fundy.
McLaughlin and Harvey continue to work with various developers and are also developing a unique installation technique for tidal energy device foundations to suit a range of gound conditions and a variaty of tidal energy turbines. |
|
 |
Company Overview |
| ABB (www.abb.com) is a leading supplier of power and automation products and solutions that will maximise the productivity, availability, reliability and performance of tidal energy installations. Our comprehensive approach covers everything from the hydrokinetic power converters that connect tidal generators to the local network, through subsea transformers, to turnkey projects for high-voltage direct current (HVDC) connections that enable efficient power transmission over long distances, delivering reliable high-quality electricity to mainland grids with minimal losses |
|
| Pre-Conference Networking Drinks Sponsor |
|
|
 |
Company Overview |
For over 25 years, Schaeffler engineers have been developing precision bearing solutions and condition monitoring systems for the renewable energy sector.
Our wealth of knowledge and technical expertise in rolling and plain bearings, lubrication, condition monitoring, and special coatings and materials for corrosion protection, is available from the concept stage through to commissioning.
Schaeffler engineers are committed to providing developers and manufacturers of wave and tidal stream systems with the optimum bearing performance solution for their application. Using our own state-of-the-art bearing calculation software, we are able to simulate bearing operating conditions to provide reliable, cost-efficient bearing designs to meet highly demanding environmental requirements.
Schaeffler remains a family-owned concern, employing over 76,000 people worldwide and generating global sales in excess of €10.7 billion (in 2011). More than 6000 staff worldwide are directly involved in research and development, with their efforts resulting in over 1600 annual patent registrations.
Please visit www.schaeffler.co.uk |
|
| Specialized Tidal and Wave Technology Sponsor |
|
 |
Company Overview |
| IHC Tidal Energy is a business unit of IHC Merwede that manufactures and markets the OceanMill tidal turbine
The OceanMill delivers commercially viable tidal energy through:
- A plug ‘n play design, which guarantees easy installation,
- easy maintenance through the positioning of critical parts above the water line and
- specialized rotor technology for higher performance.
Over 52,000 measurements confirm that the OceanMill turbine is ready to bring the never ending tidal energy to the world. This is exactly what IHC Tidal Energy aims to achieve: to enhance the world with tidal energy that has been derived from proven tidal technology.
Please visit www.ihctidalenergy.com for more information. |
|
| Workshop Host |
|
 |
Company Overview |
Siemens offers complete power conversion and connection solutions that make it easy to plan tidal power plants – with quality, flexibility and availability.
Siemens has an extensive portfolio, offering customised power conversion systems, controls and grid connection for all types of Ocean power generation, for maximum performance, operational reliability, and high energy utilisation. Our Totally Integrated concept allows all components to work together allowing increased efficiency and flexibility.
Our innovative technologies are supported by expert application and engineering knowledge, service, support and training which give you peace of mind.
We look forward to discussing this with you at the Tidal Energy Summit. |
|
| Exhibitors |
|
 |
Company Overview |
| Gurit design, engineer and manufacture finished composite components including blades and other primary structures for the Ocean Energy market. Gurit transfers relevant technology and experience from their leading positions in both the Wind Energy and Marine markets to offer Ocean Energy developers a unique level of expertise that leads the way in advanced composites. Gurit has the capability and experience to supply the complete composites solution and is a global leader in the development and manufacture of advanced composite materials combined with structural engineering, process development and prototyping; creating an unrivalled range of capabilities and a simplified composites supply chain. |
|
|
 |
Company Overview |
| The SCHOTTEL group is an innovative group of companies specialising in the development, design, production and servicing of azimuthing propulsion and manoeuvring systems as well as complete mechanical and electrical propulsion systems for vessels of all sizes and types.
Based on this experience SCHOTTEL has started activities towards free flow power generation:
- development and production of the slow speed shaft, hub and pitch mechanism for the Hammerfest HS1000 turbine employed at EMEC.
- developing a small cost effective turbine for rivers and tidal devices which has recently been tested.
- shares in TidalStream Ltd., the developer of platforms for cost effective multi-turbine installations.
|
|
|
 |
Company Overview |
The BAUER Group is an international construction and machinery manufacturing concern based in Schrobenhausen, Bavaria, Germany. The stock-market listed holding company BAUER Aktiengesellschaft is the parent of more than 110 subsidiaries in the fields of construction, equipment and resources. BAUER Renewables Ltd., a subsidiary based in the UK, is specialized in marine technologies related to renewable energy projects.
At the end of July 2011 BAUER Renewables Ltd. completed the installation of a monopile for a tidal turbine on behalf of operator Voith Hydro. The work was carried out in the test zone of the European Marine Energy Centre (EMEC) in Orkney, Scotland, UK. BAUER Renewables Ltd. deployed an underwater drilling rig newly developed and built by BAUER Maschinen GmbH. Major challenges were posed not only by drilling at a water depth of 37 meters, but also by the extremely strong currents running up to 4.5 meters per second.
|
|
|
 |
Company Overview |
| ITP (IT Power) Ltd. - The Marine Energy Experts since 1992
ITP has provided independent consulting and engineering support to the marine energy sector since 1992. Continually innovating as the sector evolves, we have helped to incubate leading technologies including Marine Current Turbines, Pulse Tidal and OWEL.
Our clients range from international and local governments, to technology developers, project developers and supply chain manufacturers.
With over 20 years’ experience in marine energy, today we offer comprehensive consulting in everything from:
Market assessments and
Feasibility studies
To:
Detailed concept design and
Array yield optimisation modelling
If you’d like to find out how we can help your company become a future marine energy success story, get in touch:
Abbie.Badcock@ITPowerGroup.com
+44 (0) 203 397 0336
Or visit our website: www.ITPower.co.uk/Marine |
|
|
 |
Company Overview |
| With a worldwide focus on climate change and the need for new alternatives for the generation of power, many new generating technologies are being developed. SEA CON® is embracing the Renewable Energy market and working with clients in many market sectors including Wave, Tidal and Hydro power. SEA CON® has been able to combine not only its strength in new product research and development, but also its vast experience in the supply of harsh environment connectors and systems. These strengths have enabled SEA CON® to provide electrical and optical solutions to this market due to the wide range of products and services already offered by the SEA CON® Group including underwater mateable fiber optic and electrical connectors and cable terminations. |
|
|
 |
Company Overview |
World class customised Permanent Magnet Machines
SINCE 1996 SMARTMOTOR has developed innovative and breakthrough technologies for making customised electrical machinery and drives for among others; renewable power generation, deck machinery and propulsion. Among our customers in these industries are Rolls Royce Marine, Kongsberg Maritime, Siemens Power Electronics, Atlantis, Kirloskar, Meygen, Sway, Flumill and Nautricity.
SmartMotor hold unique experience in designing, delivering and commissioning full drivetrain solutions for Tidal generation systems. This including the following:
- Generator drivetrain unit (generator, gear, brake and IO)
- Control system
- Converter
- System optimization (reliability, robustness, maintenance)
- System integration (simulation models, park solutions, CoE calculations)
|
|
|
 |
Company Overview |
TidalStream is developing the ‘Triton’ platform technology - a semi-submerged turbine-carrying catamaran structure secured to a seabed anchorage by a rigid swing-arm tether which can be towed to site already assembled, then deployed into its operating position by water ballasting. De-ballasting will bring the system to the surface when required for maintenance or repair.
Various versions of Triton are being developed from a 3MW capacity mid-depth version to a deeper water system which can accommodate turbines of up to 10MW from a single installation.
The Triton concept is adaptable and can accommodate turbines provided by different developers. |
|
|
|
Company Overview |
| Tronic Renewables is a group division of Siemens. We design, manufacture and install a comprehensive range of market leading, high integrity electrical and optical subsea data and power connection systems for a variety of applications, primarily for the Subsea Oil and Gas industry and more recently for the marine and offshore renewables market. Our technology provides the industry’s most reliable way of communicating in severe seawater environments. With over 30 years experience we have the reputation for delivering complete solutions that fulfil all our customer’s needs. |
|
|
 |
Company Overview |
| Twiflex Limited and Wichita Clutch, two brands of the Altra Industrial Motion group of power transmission companies, offer bespoke clutch and brake solutions to meet the demanding needs of tidal turbine applications.
Twiflex specialises in the design and manufacture of caliper disc brake technology and offers the largest range of industrial brake systems in the world.
Wichita is the global leader in multi-plate pneumatic and hydraulically actuated clutches and brakes, including oil-in-shear ‘wet’ brake units.
For the tidal energy industry, together these brands provide a single source for engineered solutions with a proven track record in supplying compact, robust, reliable, and low-maintenance products.
To access more information, including product literature, turbine application profiles and links to the main websites, please visit the dedicated tidal portal at: www.altratidal.com |
|
|
 |
Company Overview |
| Northern Ireland is recognised as a leading world-class research, development and test area in wave and tidal power. This presents a unique opportunity for device developers when combined with export-led, state-of-the-art manufacturing facilities, and integrated supply chain networks. In addition Northern Ireland can provide a wide range of support services including expertise in device deployment facilitated by deep-water port facilities. |
|
|
 |
Company Overview |
| Narec has invested over £150 million to create the UK’s national translational research centre for accelerating the deployment of offshore renewable energy technologies.
Our multidisciplinary team of scientists and engineers operate some of Europe’s largest translational research, development and testing facilities for offshore wind, wave, tidal and electrical network technologies.
These facilities address the problems and issues faced by companies seeking to develop and demonstrate technologies at large scale in a controlled environment. Narec informs the process of understanding reliability and being able to forecast performance before plant is built to minimise uncertainty in the market. |
|
|
 |
Company Overview |
| Orcades Marine is a leading provider of Marine Project Management and Consultancy Services to the Offshore Renewable Energy Sector, Shipping and Port industry. Based in the stunning Orkney Isles, we pride ourselves on providing the most economic and practical solution for your installation. OMMC consultants have many years of “hands on” experience learnt in the marine and offshore industry and have been involved since the earliest days with marine renewable energy installation Orcades Marine - Innovation, Safety and Client Satisfaction. |
|
|
 |
Company Overview |
Thordon non-metallic bearing systems provides a proven alternative to grease and oil lubricated bearings for clean power generation projects. Utilizing proprietary polymers developed and manufactured by Thordon as the bearing surface, Thordon bearing solutions deliver high reliability and long wear life, particularly in abrasive operating conditions. Applications include Turbine Main Bearings (Vertical or Horizontal), Pivot, Linkage and Operating Mechanism Bearings, Pillow Block Assemblies, Thrust Bearings and Washers, Spherical Bearings, Yaw Bearings and Wear Pads. Thordon’s strong engineering expertise can help you design and fit a water lubricated bearing solution into your system reducing your environmental impact while improving overall performance.
Please visit www.ThordonBearings.com |
|
|
 |
Company Overview |
| Wärtsilä is a global leader in complete lifecycle power solutions for the marine and energy markets. Being a truly global organization with over 100 years of experience, we have the ability to supply solutions supported by a broad product & services portfolio. We are committed to providing high quality, expert support and the availability of services wherever our customers are – and in the most environmentally sound way possible. Wärtsilä has been evolving for many years to support its customers’ needs and when it comes to seals and bearings offerings for the developing renewable energy market, particularly in the tidal sector, Wärtsilä have adapted its established portfolio to meet the requirements of the industry. Seals & Bearings, a division of Wärtsilä Services, enhances the business of its customers by providing integrated systems, packages and products that are efficient, economically sound and environmentally sustainable. |
|
|
 |
Company Overview |
| Airborne, a High-end & High-Spec Design & Build company, with her BU Marine is looking to make a splash in the market for tidal blades and marine propellers, where there is a great demand for high-quality, intelligently designed composite products based on the most advanced production processes. This puts the company at the forefront of innovation, as both tidal blades and propeller blades are virtually unchartered territory. Tidal energy is just emerging as an alternative energy source and has the potential to develop into a significant market. Airborne Marine’s goal is to develop (new) composite technology on an industrial scale for Marine applications such as Tidal Composite Blades. |
|
|
 |
Company Overview |
| Established in 2000 Aquatera delivers to local, UK and worldwide markets. With a strong track record in the marine renewable and other energy sectors, Aquatera's core business is to provide fully integrated renewables support inclusive of strategic planning, public and stakeholder engagement and environmental assessment and surveying. Clients include developers, governments, local authorities and community organisations. Aquatera is a multi-award winning company; recently awarded the Ambassador Awards & Energy North Export Award (2011 & 2012). |
|
|
 |
Company Overview |
| enviroSeel designs and manufactures high integrity cable harnesses for hazardous environments. Dual jacket sealing assures reliability - fit and forget.
Thermoplastic hot injection processes ensure complete amalgamation with the cable jackets. Applications using heat-shrink or thermoset polyurethane have much lower sealing integrity and robustness.
Thermal energy maximises the bond strength between the moulding and the connector back shell.
We continuously develop new techniques that offer innovative solutions including ‘Linear Seal’. This can be incorporated with any cable jacket and can be combined with moulded terminations to double the sealing integrity.
20 years’ experience - 100% reliability record having had no reported failures in the field. |
|
|
 |
Company Overview |
| Scotland: Leading the world in wave and tidal energy
• 25% of Europe’s tidal energy and 10% of Europe’s wave energy
• 1.6GW of wave and tidal energy produced in the Pentland Firth by 2020
• Home to the European Marine Energy Centre (EMEC) for full scale testing and accreditation
• Home to the £10 million Saltire Prize for innovation in wave and tidal energy
Scottish Development International (SDI) is a partnership between the Scottish Government, Scottish Enterprise and Highlands and Islands Enterprise, which works to attract inward investment to Scotland and helps Scottish based companies to trade overseas. |
|
|
 |
Company Overview |
The purpose of the SPL West Normandy Marine Energy, of which the ordering parties are the Regional Council of Basse Normandie, the General Council of Manche and the Urban Community of Cherbourg, is to:
- promote the region to stakeholders working in the field of marine renewable energies; -create an industrial sector based on marine renewable energy. |
|
|
 |
Company Overview |
Bluewater Energy Services B.V., headquartered in the Netherlands, is a world leader in floating, moored solutions for the oil and gas industry. With over 30 years of experience in marine engineering, installation, operation and maintenance, Bluewater is well established in turnkey deliveries of large offshore projects. Bluewater owns and operates a number of Floating Production Storage and Offloading Systems (FPSOs) and has become a leader in innovative Single Point Mooring systems.
With this experience and know-how Bluewater has developed "Bluetec", an open-architecture floating support platform for all tidal turbines. BlueTEC reduces costs and risks of a tidal energy project over its entire lifecycle, while increasing the power output.
|
|
|
 |
Company Overview |
| Mojo provide Marine Operations Management and Consultancy Services to the Offshore Renewable Energy Sector. We are unique in that we combine practical installation experience with a strong consultancy based approach allowing us to develop innovative solutions with our multi-disciplined team.
Mojo Maritime’s marine experience is in high demand in offshore renewable energy.
We provide an all-round approach as an established marine contractor and project manager with a successful track record on several high profile projects.
Mojo Maritime specialises in Project Management and Consultancy Services to the Offshore Renewable Energy Sector, in particular providing support and management on Marine Operations, Marine Construction, Engineering, Installation, and Health and Safety.
The company has built a successful track record on several high profile projects
See www.mojomaritime.com for details |
|
Top |
|
|
